новости компании о Designing Low-Power Wearable Devices with 0.49-inch OLED Displays

Introduction
As wearable technology evolves, engineers face the dual challenge of minimizing power consumption while maintaining clear, reliable display performance. The 0.49-inch 64×32 OLED display from Saef Technology Limited offers a compelling solution with its ultra-compact form factor, monochrome clarity, and I2C-driven efficiency.

Key Design Challenges & OLED Advantages
Wearable devices demand displays that are not only small and lightweight but also energy-efficient and easy to integrate. The SFOS049XZ-7111AN model addresses these needs with:

• Low Power Operation: Sleep mode currents as low as 1µA (VDD) and 2µA (VCC).

• Integrated Charge Pump: Enables operation from a single Li-ion cell (3.3V–4.2V).

• I2C Interface: Reduces pin count and simplifies PCB layout.

Technical Deep Dive: Power Management
The display supports two power configurations:

1. External VCC (7.0V–7.5V)

2. Internal DC-DC Converter (from VBAT = 3.3V–4.2V)

The internal charge pump—using flying capacitors (C1P, C1N)—eliminates the need for an external boost converter, saving board space and BOM cost.

Software Initialization & Commands
Using the SSD1315 controller, engineers can send I2C commands to control contrast, scrolling, and display modes. The power-up sequence must follow the spec to avoid panel damage:

// Example power-up sequence
RES = 0;
delay(1000);
RES = 1;
write_cmd(0xAE); // Display OFF
// Initialization commands...
write_cmd(0xAF); // Display ON

Why Choose Saef’s OLED Module?
Saef’s display is rated for 10,000 hours at 120 cd/m² and supports a wide temperature range (-40°C to +85°C), making it ideal for medical, fitness, and industrial wearables.

Conclusion
For engineers designing next-generation wearables, the SFOS049XZ-7111AN OLED provides a robust, low-power, and easy-to-integrate display solution. Download the full SFOS049XZ-7111AN Datasheet.pdf  here to explore all features.